Assistant Mine Surveyor supports the mine surveyor with making measurements and determining property boundaries. This role will further support in making accurate Surveys, Levelling, Contouring,( Traversing, Triangulation, Co-relation, Setting out Curves etc.) and for preparing such Plans, sections and tracing etc. as required under Provision/Statute.

The primary role of Banksman entails superintending the lowering and raising of persons, tools and materials and transmitting the signals at the top of a shaft or incline

The bulldozer operator uses the tractor and blade to scoop out soil, move rock and ore to other locations on the site, and to level the soil. Bulldozers are capable of pushing ore and rock. Bulldozer operators are also responsible for confirming that their safety systems are working properly and for performing basic maintenance on the Bulldozer.

Compressor operator operates and services power driven air compressor which generates and supplies compressed air to drive pneumatic tools, hoists and other mechanical equipment

This role is responsible for input and processing of the text and data; preparing, editing and generating the documents for storage, processing, publication and transmission; maintaining process parameters, and maintaining a safe & healthy working environment.

A dewatering pump operator operates power driven pumps for pumping, storing and supplying liquids. The operator may also repair and clean, oil and grease the pump.

A Driver Special Vehicle in mining area is responsible for driving a sprinkler Truck/vehicle to control dust on a haul-road or an explosive carrier truck used to deliver explosives to mine sites. He/she know and understand the basic of mining operations, traffic rules to be followed in the mining area and safety guidelines for mining operations in line with Mine Vocation Training Rules.

The Dumper/Tipper operator drives a heavy specialized truck used to haul large volumes of over burden, rock or ore over short distances. The dumper operator then uses the body hoist control lever to tip the rear part of the truck in order to discharge its load to rear, bottom or one side of the truck. Dumper operators are responsible to check that their safety systems are working properly and for performing basic maintenance on the Dumper.

An Excavator operator drives and controls an excavator which is a self-propelled machine used to dig and dump above the base level of the machine. It is often used to excavate coal, rock, ore, over-burden in mines. In addition to an operator cabin that has all control-systems, it has a fixed boom, a movable dipper stick and a forward opening bucket. Using an excavator is a specialized task that can be safely performed only with adequate training and experience. Safety is extremely critical to avoid property damage and personal injury. Excavator operators are also responsible for performing basic maintenance on the excavator.

Explosive Van operator carries out the blasting explosive/ drive bulk explosives vehicle to mining area safely. Besides knowledge of driving fundamentals,the role requiresthe individual to know and understand the basic of mining operations, traffic rulesto be followed in the mining area and safety guidelinesfor mining operations prescribed by DGMS. Vehicle drivers are also responsible for performing basic maintenance on the vehicle and to ensure that the safety systems in the vehicle are functional.

This role is responsible for prevention as well as rescue of the mine areas and mine workers from the hazardous fires that can be a potential threat to life and property.

Gas Detector identifies the rate of emission of the adsorbed gas like CH4 from the rock being extracted and identifies the percentage/ concentration of different gases like CO, CO2, etc. which might be present in the general body of air or the sealed off area in an underground mine.

The Grader Operator operates the grader and other heavy equipment in a safe and effective manner in order to ensure the roadways are accessible, safe and in good operating condition.

A haulage operator removes the cut/ blasted material from the working face or any other raw material required in the operation of the mine, with the help of haulage equipment like tugger, endless haulage, main and tail haulage and remotely controlled haulages in such a manner as to enhance the performance of the loading/cutting machines and maximize the productivity of the overall section.

This job diagnoses, repairs, overhauls and services Heavy Earth Moving Machinery (HEMM) to keep them in good running order. Also carries out repairs of internal combustion engines